IP-DECT Server 6500

Call Control Protocol Support
• Session Initiated Protocol (SIP)

SIP VOIP Support
• Basic calling
• Caller ID
• Call Hold
• Call Transfer
• Call Waiting
• Music on Hold (MOH)
Note: Additional advanced telephony solution available depending on integration with host SIP-PBX (Call control / UC/UCaaS Platform)

Application Protocols
• XML-RPC API supporting:
– Broadcast Messaging
– Message Service Functions (MSF)
– Task Messages
• OAM REST API (AMIE)

Supported Codecs
• G.711 A-law and μ-law
• G.726 (32 kbps – 4 bit ADPCM)
• G.729

Operation And Maintenance
• High speed Web GUI for administration and maintenance
• Provisioning, maintenance, and supervision of all infrastructure components and Spectralink DECT handsets in the solution
• HTTP with digest authentication
• HTTPS
• Syslog
• SNMP v2

System Architecture
• The Spectralink IP-DECT Server 6500 is a control unit acting as a SIP integration unit to the host SIP Call Control / UC / UCaaS platform, which also controls and handles all other infrastructure elements
• Max. no. of:
– IP-DECT Base Stations: 1024
– Simultaneous calls on each IP-DECT Base Station: 11
– Repeaters on each IP-DECT Base Station: 3
– Media Resources: 32 (each MR supports 32 Channels)
– Simultaneous calls with one Media Resource (G.711): 32
– Simultaneous calls with 32 MR: 1,024
• Registered DECT handsets: scalable to 4,095

Networking
• 10/100 Mbps Ethernet port
• Manual or dynamic host configuration protocol (DHCP)
• Time & date sync using Network Time Protocol (NTP)

Provisioning
• System Configuration
• User data
• Server firmware (Software Assurance License required)
• Base station firmware (Software Assurance License required)
• Handset firmware (Software Assurance License required)

Enhanced Provisioning
• The unit can be programmed to download its own configuration and user settings as well as handset firmware and then update the handset firmware based on a programmed
schedule (e.g. upgrade at 03:00).
Note: Scheduled firmware update to all the handsets is accomplished via SUOTA, providing totally automated firmware roll-out support to update IP-DECT Server 6500 and all connected Base Stations & handsets.

Approvals (Regulatory Standards)
• Radio Equipment Directive 2014/53/EU
• Low Voltage Directive 2014/35/EU (CE)
• FCC 47 CFR Part 15

Safety (Regulatory Standards)
• UL62368-1 CAN/CSA-C22.2 No. 62368-1
• IEC 62368-1
• AS/NZS 62368-1
• EN 62368-1
Please check our support site for the latest approvals and regulatory compliance.

Environmental Conditions
• Operating temperature: 50 – 104º F (10 – 40º C)
• Storage temperature: 58 – 158º F (-50 – 70º C)
• Relative humidity: between 20% and 80% (noncondensing)
• The equipment is in compliance with the requirements of EU directive 2011/65/EU (ROHS) and 2012/19/EU (WEEE)

Electrical Requirements
• The supplied power for unit must be 110 to 240 AC nominal, 50/60 Hz

Physical Characteristics
• Size: 17.3 x 7.8 x 1.7 in. (440 x 199 x 44 mm)
• Weight: 83.0 oz (2,354 gr.)
• Grey
• Rack and wall-mountable, indoor
• IP20

Interoperability
• For information about supported Call Control / Unified Communications (UC/UCaaS) (PBX and IP-PBX) platforms, visit support.spectralink.com.